Injekzio bidezko makinaren egitura funtzioa

2021-07-14

Ren egiturazko funtzioainjekzioa moldatzeko makinainjekzio sistema, estutze sistema, transmisio hidrauliko sistema, kontrol elektriko sistema, lubrifikazio sistema, berokuntza eta hozte sistema etainjekzioa moldatzeko makinamonitorizazio sistema.
1. Injekzio sistema
One of the main components of the injekzioa moldatzeko makina is the main camera system. Plunger type, screw type and screw pre-plasticized plunger type are usually three types of injection systems. The screw type is widely used. The injection system is composed of a plasticizing device and a power transmission device. Injection cylinder, injection seat moving cylinder and screw

2. Kontrol elektrikoa
Etxetresna elektrikoek, osagai elektronikoek, kontagailuek, berogailuek, sentsoreek eta abarrek batera kontrol elektrikoa osatzen dute, eta lau kontrol modu egon ohi dira: eskuzkoa, erdi automatikoa, guztiz automatikoa eta doikuntza. Prozesuaren eskakizunak (presioa, tenperatura, abiadura, denbora) eta programako hainbat ekintzainjekzio makinakontrol sistema elektrikoa eta sistema hidraulikoa modu egokian egokituz bat etor daiteke.


3. Berokuntza / Hozketa

Heating the barrel and the injection nozzle is the main purpose of the heating system. The heating device of the barrel of the injekzioa moldatzeko makina usually uses an electric heating coil, which is installed externally, and uses an electric thermocouple to detect in sections. The heat source of material plasticization is provided by the heat conduction of the cylinder wall. Excessive oil temperature will cause multiple failures. Therefore, it is the main purpose of controlling the oil temperature and cooling the oil temperature. Near the feeding port of the feed pipe is another place that needs to be cooled to avoid melting of the raw materials at the feeding port, which will cause the raw materials to fail to be fed normally.

4. Lubrifikazio sistema
A loop gastric lubrication system that provides lubrication conditions at the relative moving parts of the injekzioa moldatzeko makina's movable template, mold adjusting device, connecting rod hinge, injection platform, etc., so that energy consumption is reduced and the life of parts is increased, whether it is automatic electric Or regular manual lubrication is acceptable.


5. Injekzio bidezko makinajarraipena

Pertsonak eta makinak babesteko erabiltzen den gailua gailu nagusia dainjekzioa moldatzeko makina. Doors, baffles, hydraulic valves, limit switches, and photoelectric detection components are the main components, enabling the realization of the electric-mechanical-hydraulic interlocking protection. The oil temperature, material temperature, system overload of the injekzioa moldatzeko makina, as well as process and equipment failures are detected, and the main function of the system to indicate abnormal conditions or alarm is not detected.
  • QR